Range Remap
Limit and remap the incoming modifier value.
Range Remap
Method #
This node limits the range of values that can be output and remaps incoming values to fit within the output ranges.
The output is a numeric value that can be further processed with other modifiers, or directly connected to a parameter in another node, using the operation method selected.
Parameters
These properties control the core behaviours of the node.
Parameter Details
Current Value Shows the current value of the effect. Cannot be directly changed.
Value Base value to modify the output value with.
Modifier Operation The operation to be performed on the targeted parameter.
- Add : Adds to the parameter value.
- Subtract : Subtracts from the parameter value.
- Multiply : Multiplies the parameter value.
- Replace : Replaces the parameter value.
These properties control the incoming data range. Values outside this range will be clamped.
Parameter Details
In Lower Lowest value in that will be remapped into range.
In Upper Highest value in that will be remapped into range.
These properties control the outgoing data range.
Parameter Details
Out Lower Lowest value that can be output.
Out Upper Highest value that can be output.
Inputs
These properties control the core behaviours of the node.
| Parameter | Details |
|---|---|
| Current Value | Shows the current value of the effect. Cannot be directly changed. |
| Value | Base value to modify the output value with. |
| Modifier Operation | The operation to be performed on the targeted parameter.
|
These properties control the incoming data range. Values outside this range will be clamped.
| Parameter | Details |
|---|---|
| In Lower | Lowest value in that will be remapped into range. |
| In Upper | Highest value in that will be remapped into range. |
These properties control the outgoing data range.
| Parameter | Details |
|---|---|
| Out Lower | Lowest value that can be output. |
| Out Upper | Highest value that can be output. |
| Name | Description | Typical Input |
|---|---|---|
| Value | Input a value from another modifier to be modified by this node. | Math Modifier |