Extrude Faces Deformer
Extrudes each face of a mesh individually.
Extrude Faces Deformer
Method #
This node extrudes the faces of a mesh and generates additional adjacent polygons to connect the extruded faces.
Because this node generates new polygons, using it with meshes with high polygon counts may substantially impact performance. Proceed with caution.
Parameters
These properties control the 3D transforms of the node. Transforms will generally be inherited by child nodes, although they can be ignored through the Inherit Transform Channels attributes.
Parameter Details
Position X Move along the local x-axis.
Position Y Move along the local y-axis.
Position Z Move along the local z-axis.
Rotation Heading Rotate around the local y-axis.
Rotation Pitch Rotate around the local x-axis.
Rotation Bank Rotate around the local z-axis.
Scale X Scale along the local x-axis.
Scale Y Scale along the local y-axis.
Scale Z Scale along the local z-axis.
Toggle which transform channels should be inherited from the parent node. By default, all transforms will be inherited.
Parameter Details
Position X Toggle inheritance of the X Position from the parent.
Position Y Toggle inheritance of the Y Position from the parent.
Position Z Toggle inheritance of the Z Position from the parent.
Rotation Heading Toggle inheritance of the Rotation Heading from the parent.
Rotation Pitch Toggle inheritance of the Rotation Pitch from the parent.
Rotation Bank Toggle inheritance of the Rotation Bank from the parent.
Scale X Toggle inheritance of the X Scale from the parent.
Scale Y Toggle inheritance of the Y Scale from the parent.
Scale Z Toggle inheritance of the Z Scale from the parent.
World Position Only Inherit the world position from the parent only, rotation and scale will be ignored. Overrides above properties.
Inherit Time Toggle inheritance of time from the parent.
These properties control the core behaviours of the node.
Parameter Details
Subdivision Order Toggle whether the deformer is added before or after the object is subdivided.
- Before Subdivision : The deformation is applied before any subdivision is added.
- After Subdivision : The deformation is applied after subdivision, or inbetween if the subdivision level property is modified.
Subdivision Level The subdivision level at which the deformer is applied. Subdivision Order must be set to After Subdivision to Function.
Vertex Source Mode Choose whether the deformer applies to the individual vertices or the mesh chunks.
- Vertex Positions : The mesh deformations are applied to the mesh vertices.
- Chunks : The mesh deformations are applied to the seperated mesh pieces.
Polygon Contraction How much each face should taper inwards after extrusion.
Offset By Normals How much each face should be offset from the surface, in the direction of the face normal.
These properties control where the deformer affects the geometry.
Parameter Details
Falloff Enabled Enable falloff from the position of the deformer.
Falloff Shape Select which shape to use to draw falloff from.
- Sphere : How quickly the falloff drops to 0 at the outer falloff.
- Cylinder - X : Falloff is drawn radially outward from a line along the x axis, forming a cylindrical falloff.
- Cylinder - Y : Falloff is drawn radially outward from a line along the y axis, forming a cylindrical falloff.
- Cylinder - Z : Falloff is drawn radially outward from a line along the z axis, forming a cylindrical falloff.
- Plane - X : Falloff is drawn outward from a plane formed on the YZ axis.
- Plane - Y : Falloff is drawn outward from a plane formed on the XZ axis.
- Plane - Z : Falloff is drawn outward from a plane formed on the XY axis.
Falloff Range Limits the range the deformer is effective at.
Falloff Inner Range The inner range from which the falloff is calculated from.
Falloff Curve Power How quickly the falloff drops to 0 at the outer falloff.
Invert Falloff Invert the direction of the falloff.
Falloff Curve Visualises the falloff curve, from being completely in effect to no longer effective.
Inputs
These properties control the 3D transforms of the node. Transforms will generally be inherited by child nodes, although they can be ignored through the Inherit Transform Channels attributes.
| Parameter | Details |
|---|---|
| Position X | Move along the local x-axis. |
| Position Y | Move along the local y-axis. |
| Position Z | Move along the local z-axis. |
| Rotation Heading | Rotate around the local y-axis. |
| Rotation Pitch | Rotate around the local x-axis. |
| Rotation Bank | Rotate around the local z-axis. |
| Scale X | Scale along the local x-axis. |
| Scale Y | Scale along the local y-axis. |
| Scale Z | Scale along the local z-axis. |
Toggle which transform channels should be inherited from the parent node. By default, all transforms will be inherited.
| Parameter | Details |
|---|---|
| Position X | Toggle inheritance of the X Position from the parent. |
| Position Y | Toggle inheritance of the Y Position from the parent. |
| Position Z | Toggle inheritance of the Z Position from the parent. |
| Rotation Heading | Toggle inheritance of the Rotation Heading from the parent. |
| Rotation Pitch | Toggle inheritance of the Rotation Pitch from the parent. |
| Rotation Bank | Toggle inheritance of the Rotation Bank from the parent. |
| Scale X | Toggle inheritance of the X Scale from the parent. |
| Scale Y | Toggle inheritance of the Y Scale from the parent. |
| Scale Z | Toggle inheritance of the Z Scale from the parent. |
| World Position Only | Inherit the world position from the parent only, rotation and scale will be ignored. Overrides above properties. |
| Inherit Time | Toggle inheritance of time from the parent. |
These properties control the core behaviours of the node.
| Parameter | Details |
|---|---|
| Subdivision Order | Toggle whether the deformer is added before or after the object is subdivided.
|
| Subdivision Level | The subdivision level at which the deformer is applied. Subdivision Order must be set to After Subdivision to Function. |
| Vertex Source Mode | Choose whether the deformer applies to the individual vertices or the mesh chunks.
|
| Polygon Contraction | How much each face should taper inwards after extrusion. |
| Offset By Normals | How much each face should be offset from the surface, in the direction of the face normal. |
These properties control where the deformer affects the geometry.
| Parameter | Details |
|---|---|
| Falloff Enabled | Enable falloff from the position of the deformer. |
| Falloff Shape | Select which shape to use to draw falloff from.
|
| Falloff Range | Limits the range the deformer is effective at. |
| Falloff Inner Range | The inner range from which the falloff is calculated from. |
| Falloff Curve Power | How quickly the falloff drops to 0 at the outer falloff. |
| Invert Falloff | Invert the direction of the falloff. |
| Falloff Curve | Visualises the falloff curve, from being completely in effect to no longer effective. |
| Name | Description | Typical Input |
|---|---|---|
| Falloff Node | Use an input node to control the transformation values of the falloff. | Null |
| Generated Weightmap | Add a weightmap to vary the strength of the deformer across the surface. | Generate Weightmap Deformer |
| Transform Modifiers | Apply the transforms of another node to this node. | Null |
| Target Node | Modifiy the rotations of the node to always direct the z axis towards the input. | Null |
| Local Transform Override | Apply the transforms of another node to this node, relative to its parent. | Null |
