Method
Applies a fluid simulation as a deformation on a procedural.
Example |
---|
![]() |
Example Nodegraph |
---|
![]() |
Transform
Name |
Description |
---|
Position X |
Move its position along the x-axis in local space. |
Position Y |
Move its position along the y-axis in local space. |
Position Z |
Move its position along the z-axis in local space. |
Rotation Heading |
Rotate the object about the y-axis. |
Rotation Pitch |
Rotate the object about the x-axis. |
Rotation Bank |
Rotate the object about the z-axis. |
Scale X |
Scale along the x-axis. |
Scale Y |
Scale along the y-axis. |
Scale Z |
Scale along the z-axis. |
Inherit Transform Channels
Toggle which transform channels should be inherited. By default, all are on.
Attributes
Name |
Description |
---|
Fluid Simulation Speed |
The speed of the fluid simulation |
Curl Noise Amount |
The amplitude of the noise pattern when using Solver Mode is set to Curl Noise |
Noise Size |
The scale of the noise pattern when using Solver Mode is set to Curl Noise |
Solver Mode |
The type of fluid simulation to perform.
- Solver, This feature is in development.
- Curl Noise, Uses an internal noise pattern to drive the fluid motion.
|
Grid Width/Height/Depth |
The resolution of the solver’s simulation grid. |
Inputs
Name |
Description |
Typical Node Input |
---|
Bounding Box |
The region within which to perform the fluid simulation. |
Bounding Box |
Transform Modifier |
Links all transform properties to the input node. |
Null |
Target Node |
Always faces the x-axis towards the inputs anchor point. |
Null |
Local Transform Override |
Override the transformation values of the node, relative to its parent. |
Null |
Outputs
There are no outputs from this node.