Speed Tracking Modifier
Method #
This node calculates the rate of movement of the source node, connected via the “Tracked Node” input, and outputs it as a value.
The output is a numeric value that can be further processed with other modifiers, or directly connected to a parameter in another node, using the operation method selected.
Parameters
These properties control the core behaviours of the node.
Parameter Details
Scale Adjust the scale/range of the modifier.
Smoothing Adjust the amount of smoothing to applied to the output value.
Decay Controls the time between the peak to the sustain level.
Max Speed Set a maximum speed the modifier can read for a value.
Operation The operation to be performed on the targeted parameter.
- Add : Adds to the parameter value.
- Subtract : Subtracts from the parameter value.
- Multiply : Multiplies the parameter value.
- Replace : Replaces the parameter value.
Inputs
These properties control the core behaviours of the node.
| Parameter | Details |
|---|---|
| Scale | Adjust the scale/range of the modifier. |
| Smoothing | Adjust the amount of smoothing to applied to the output value. |
| Decay | Controls the time between the peak to the sustain level. |
| Max Speed | Set a maximum speed the modifier can read for a value. |
| Operation | The operation to be performed on the targeted parameter.
|
There are no inputs for this node.