Continuous Modifier - Notch Reference Manual

Method

This modifier continually increments or decrements the targeted parameter value at a constant rate.

Name	Description
Current Value	Shows the current value of the effect. Cannot be directly changed.
Speed	The speed at which the modifier increases (per second)
Scale	The scale/range of the modifier
Modifier Operation	The operation to be performed on the targeted parameter. Add, adds to the parameter value. Subtract, subtracts from the parameter value. Multiply, multiplies the parameter value. Replace, replaces the parameter value.
Time Mode	How the modifier updates in relation to the time code. Locked To Timecode, The modifier values are locked to the time code and the same time will always yield the same numerical value. Running / Looping, The modifier values are disconnected from the time code and will loop seamlessly at the end of the layer. This also means that animated speed values will change smoothly.

There are no inputs for this node.

The output is a numeric value that acts upon a connected parameter input of another node, using the operation method selected.