Method

This node accumulates input values.

Attributes

Name Description
Current Value Shows the current value of the effect. Cannot be directly changed.
Value Base value to modify the output value with.
Accumulator Mode How the accumulator should accumulate values.
  • Value, The whole values is added on each update.
  • Value Delta, The difference between the previous value and the new value is added.
Wrap Mode How the accumulator wraps when it meets its max value.
Attack Controls the initial time between the current value to the peak.
Change Threshold Threshold below which new values will not be added to the accumulator.
Scale The scale/range of the modifier
Modifier Operation The operation to be performed on the targeted parameter.
  • Add, adds to the parameter value.
  • Subtract, subtracts from the parameter value.
  • Multiply, multiplies the parameter value.
  • Replace, replaces the parameter value.
Max Value Maximum value the accumulator can reach. Only used with “Clamp To Max” or “Wrap” in the Accumulator node.

Inputs

There are no inputs for this node.

Outputs

The output is a numeric value that acts upon a connected parameter input of another node, using the operation method selected.