Notch Notch Manual 1.0
 Light | Dark
Video NDI Source

Video NDI Source

Use input from an NDI IP video stream.

Method #

Use input from an NDI IP video stream.

See NDI topic for step by step instructions on how to use NDI in Notch.

Parameters

These properties control the core behaviours of the node.

ParameterDetails
Preview In ViewportPreview the generated image as an overlay in the viewport.
  • Off : No preview is generated.
  • RGBA : Preview the image blended with alpha in the viewport.
  • RGB : Preview the colour channels in the viewport.
  • Alpha : Preview the alpha channel in the viewport.
  • PIP : Preview the image blended with alpha in the viewport, in a smaller picture in picture display, on top of the existing content.
Apply PostFX Before Alpha Image Input (Legacy)When enabled, the alpha input image is applied after the postfx pass, overwriting any effects the postfx would have applied to the alpha channel.
NDI SourceChoose the NDI Source from the available sources list.
NDI Source NameSpecify the NDI Source by name. The name should be entered as presented by the ndi protocol, e.g. ‘mynotchpc (test pattern)’.
NDI Source IPThe ndi source IP address. e.g. ‘192.168.1.25’
Flip Image XFlip the image along the x-axis.
Flip Image YFlip the image along the y-axis.

Inputs

NameDescriptionTypical Input
Effect MaskMask out areas that Post-FX applied to this node won’t be applied.Loader
Alpha ImageUse a separate video nodes luminance values to overwrite the alpha channel of the image.Loader