Curve Remap Modifier
Updated: 9 Jan 2026
Remaps a modifier's value based on a curve
Curve Remap Modifier
Method #
This node takes the value of a modifier and remaps its value based on a customisable curve. The node takes the input value, moves along the curve by that amount, and then outputs the value at that point on the curve.
Parameters
These properties control the core behaviours of the node.
Parameter Details Current Value
Shows the current value of the effect. Cannot be directly changed.
Value
Base value to modify the output value with.
Curve
Programmable curve used to calculate the remapped output.
Blend Amount
Control how much the modifier affects the values its input into.
In Scale
Multiplies the incoming value by this amount before being used by the node.
In Offset
Adds this amount to the incoming value before being used by the node.
Out Scale
Multiplies the curve output by this amount.
Out Offset
Adds this amount to the curve output value.
Operation
The operation to be performed on the targeted parameter.
- Add : Adds to the parameter value.
- Subtract : Subtracts from the parameter value.
- Multiply : Multiplies the parameter value.
- Replace : Replaces the parameter value.
The properties control the time at which the node is active. See Timeline for editing time segments.
Parameter Details Duration
Control the duration of the node’s time segment.
- Composition Duration : Use the length of the composition for the node’s time segment duration.
- Custom : Set a custom duration for the node’s time segment.
Node Time
The custom start and end time for the node.
Duration (Timecode)
The length of the node’s time segment (in time).
Duration (Frames)
The length of the node’s time segment (in frames).
Time Segment Enabled
Set whether the node’s time segment is enabled or not in the Timeline.
Inputs
These properties control the core behaviours of the node.
| Parameter | Details |
|---|---|
| Current Value | Shows the current value of the effect. Cannot be directly changed. |
| Value | Base value to modify the output value with. |
| Curve | Programmable curve used to calculate the remapped output. |
| Blend Amount | Control how much the modifier affects the values its input into. |
| In Scale | Multiplies the incoming value by this amount before being used by the node. |
| In Offset | Adds this amount to the incoming value before being used by the node. |
| Out Scale | Multiplies the curve output by this amount. |
| Out Offset | Adds this amount to the curve output value. |
| Operation |
The operation to be performed on the targeted parameter.
|
The properties control the time at which the node is active. See Timeline for editing time segments.
| Parameter | Details |
|---|---|
| Duration |
Control the duration of the node’s time segment.
|
| Node Time | The custom start and end time for the node. |
| Duration (Timecode) | The length of the node’s time segment (in time). |
| Duration (Frames) | The length of the node’s time segment (in frames). |
| Time Segment Enabled | Set whether the node’s time segment is enabled or not in the Timeline. |
This node has no inputs.