Delay Value
Updated: 4 Dec 2023
Delays the output of modifier over time.
Delay Value
Method #
This node delays the output of an input modifier by a time frame set by the Delay Time.
The output is a numeric value that can be further processed with other modifiers, or directly connected to a parameter in another node, using the operation method selected.
Parameters
These properties control the core behaviours of the node.
Parameter Details Current Value
Shows the current value of the effect. Cannot be directly changed.
Value
Base value to modify the output value with.
Delay Time
Time in seconds the output value should be delayed by. Above 10, it will run out of space in its buffer and will no longer delay input values.
Scale
Adjust the scale/range of the modifier.
Operation
The operation to be performed on the targeted parameter.
- Add : Adds to the parameter value.
- Subtract : Subtracts from the parameter value.
- Multiply : Multiplies the parameter value.
- Replace : Replaces the parameter value.
The properties control the time at which the node is active. See Timeline for editing time segments.
Parameter Details Duration
Control the duration of the node’s time segment.
- Composition Duration : Use the length of the composition for the node’s time segment duration.
- Custom : Set a custom duration for the node’s time segment.
Node Time
The custom start and end time for the node.
Duration (Timecode)
The length of the node’s time segment (in time).
Duration (Frames)
The length of the node’s time segment (in frames).
Time Segment Enabled
Set whether the node’s time segment is enabled or not in the Timeline.
Inputs
These properties control the core behaviours of the node.
| Parameter | Details |
|---|---|
| Current Value | Shows the current value of the effect. Cannot be directly changed. |
| Value | Base value to modify the output value with. |
| Delay Time | Time in seconds the output value should be delayed by. Above 10, it will run out of space in its buffer and will no longer delay input values. |
| Scale | Adjust the scale/range of the modifier. |
| Operation |
The operation to be performed on the targeted parameter.
|
The properties control the time at which the node is active. See Timeline for editing time segments.
| Parameter | Details |
|---|---|
| Duration |
Control the duration of the node’s time segment.
|
| Node Time | The custom start and end time for the node. |
| Duration (Timecode) | The length of the node’s time segment (in time). |
| Duration (Frames) | The length of the node’s time segment (in frames). |
| Time Segment Enabled | Set whether the node’s time segment is enabled or not in the Timeline. |
There are no inputs for this node.