Continuous Modifier
Method #
This modifier continually increments or decrements the targeted parameter value at a constant rate.
The output is a numeric value that can be further processed with other modifiers, or directly connected to a parameter in another node, using the operation method selected.
Parameters
These properties control the core behaviours of the node.
Parameter Details Current Value Shows the current value of the effect. Cannot be directly changed.
Speed The speed at which the modifier increases (per second)
Scale Adjust the scale/range of the modifier.
Modifier Operation The operation to be performed on the targeted parameter.
- Add : Adds to the parameter value.
- Subtract : Subtracts from the parameter value.
- Multiply : Multiplies the parameter value.
- Replace : Replaces the parameter value.
Time Mode How the modifier updates in relation to the time code.
- Locked To Timecode : The modifier values are locked to the time code and the same time will always yield the same numerical value.
- Running / Looping : The modifier values are disconnected from the time code and will loop seamlessly at the end of the layer. This also means that animated speed values will change smoothly.
Inputs
These properties control the core behaviours of the node.
| Parameter | Details |
|---|---|
| Current Value | Shows the current value of the effect. Cannot be directly changed. |
| Speed | The speed at which the modifier increases (per second) |
| Scale | Adjust the scale/range of the modifier. |
| Modifier Operation | The operation to be performed on the targeted parameter.
|
| Time Mode | How the modifier updates in relation to the time code.
|
There are no inputs for this node.