Method
This node modifies the current colour correction of an image.
| Example Nodegraph |
|---|
![]( "Colour Correction") |
Attributes
| Name |
Description |
|---|
| Active |
Turn the effect on or off. Values < 0.1 will turn the effect off, and deferred rendering must be on. |
| Blend Amount |
Changes the opacity of the new effect over the original image. |
| Blend Mode (RGB) |
Change how the generated effect blends with the parent image RGB. |
| Blend Mode (Alpha) |
Change how the generated effect blends with the parent image alpha. |
| Apply To Solid Geometry Only |
Toggle whether the effect should only apply to solid geometry, or the whole of the scene. |
| Apply To Filled Pixel Only |
Only apply to pixels with some content on them. Useful for Virtual Production contexts, where Post-FX applied to the front plate shouldn’t apply over the backplate. |
| Clamp Source Colour |
Clamp the incoming colours to be between 0-1. |
Affect Channels
Select which of the RGBA colour channels are affected by the effect.
Levels
| Name |
Description |
|---|
| In Black |
Darken the dark parts of the image. |
| In White |
Brighten the light parts of the image. |
| Out Black |
Darkens the dark parts of the image. |
| Out White |
Brighten the light parts of the image. |
| Gamma |
Changes the gamma value of the image. |
| Brightness |
Control the brightness of the image. |
| Contrast |
Control the contrast of the image. |
| Saturation |
Control the saturation of the image. |
| Hue |
Control the hue of the image. |
Colours
| Name |
Description |
|---|
| Red |
Change the amount of red used in the whole image. |
| Green |
Change the amount of green used in the whole image. |
| Blue |
Change the amount of blue used in the whole image. |
Colours – Hilights
| Name |
Description |
|---|
| Red Hi |
Change the amount of red used in the bright parts of the image. |
| Green Hi |
Change the amount of green used in the bright parts of the image. |
| Blue Hi |
Change the amount of blue used in the bright parts of the image. |
Colours – Midtones
| Name |
Description |
|---|
| Red Mid |
Change the amount of red used in the midtones of the image. |
| Green Mid |
Change the amount of green used in the midtones of the image. |
| Blue Mid |
Change the amount of blue used in the midtones of the image. |
Colours – Shadows
| Name |
Description |
|---|
| Red Low |
Change the amount of red used in the dark parts of the image. |
| Green Low |
Change the amount of green used in the dark parts of the image. |
| Blue Low |
Change the amount of blue used in the dark parts of the image. |
Inputs
There are no inputs for this node.
Outputs
There are no outputs from this node.
