Notch Notch Manual 0.9.23
 Light | Dark
Speed Tracking Modifier

Speed Tracking Modifier

Calculates speed of movement in an input node.

Method #

This node calculates the rate of movement of the source node, connected via the “Tracked Node” input, and outputs it as a value.

The output is a numeric value that can be further processed with other modifiers, or directly connected to a parameter in another node, using the operation method selected.

Parameters

These properties control the core behaviours of the node.

ParameterDetails
ScaleAdjust the scale/range of the modifier.
SmoothingAdjust the amount of smoothing to applied to the output value.
DecayControls the time between the peak to the sustain level.
Max SpeedSet a maximum speed the modifier can read for a value.
OperationThe operation to be performed on the targeted parameter.
  • Add : Adds to the parameter value.
  • Subtract : Subtracts from the parameter value.
  • Multiply : Multiplies the parameter value.
  • Replace : Replaces the parameter value.

Inputs

There are no inputs for this node.