The topic you requested could not be found.
Related topics are listed below.

Glass RT Material

Nodes » Materials » Glass RT Material

Method A basic glass material, similar to the default material node but with default raytraced glass settings. Glass material *This material needs Ray Tracing to be enabled on the root to work. BRDF Name Description …

RT Glass Refraction

Nodes » Ray Tracing » RT Glass Refraction

Method The RT Glass Refraction node is a fast cheap raytraced glass solution. This node can be used in scenes that need additional performance such as lightmapped scenes that aren’t using the pathtracer node. Once the Glass Refraction node is added to the…

Semi-Transparent RT Material

Nodes » Materials » Semi-Transparent RT Material

Method A basic semi-transparent RT material, similar to the default material node but default raytraced glass settings. Semi-Transparent RT Material *This material needs Ray Tracing to be enabled on the root to work. BRDF Name…

Fake Glass Material

Techniques » Fake Glass Material

Method Transparent materials such as glass or liquid are quite tricky to reproduce correctly in a real time engine. It is often necessary to cheat to get as close as possible to a pure and slow ray traced rendering. Sample Project Fake Glass Material…

RT Refinement

Nodes » Ray Tracing » RT Refinement

Method Ray tracing is computationally intensive and some effects – such as soft area light shadows – rely on lots and lots of rays being cast per pixel. In order to make this viable in real-time or while editing interactively, Notch typically casts very…

Material

Nodes » Materials » Material

Method Create a PBR material that can be applied to particles, 3D meshes and other objects in a 3D scene. Rock and brick PBR materials BRDF Name Description Colour The colour of the material. Brightness…

RT Ambient Occlusion

Nodes » Ray Tracing » RT Ambient Occlusion

Method This node simulates ambient occlusion by casting a large number of rays in random directions in a sphere or hemisphere from each point on the screen, and determining what percentage of them hit something before reaching the extent of the bounding sphere. …

RT Mirror Reflection

Nodes » Ray Tracing » RT Mirror Reflection

Method RT Mirror Reflection is the fastest raytracing reflections node with only a single, sharp ray traced bounce supported. This can be used to simulate mirrors, reflections and specular on any raytracing enabled specular material/surface. Rough reflections are not…

RT Multi-Bounce Reflection

Nodes » Ray Tracing » RT Multi-Bounce Reflection

Method The Reflection Multi-Bounce node simulates specular lighting of solid objects accurately with support for multiple bounces with varying roughness and other material attributes. Only specular interactions are handled by this node, making it a good compliment for…

RT Diffuse Bounces

Nodes » Ray Tracing » RT Diffuse Bounces

Method The Diffuse Bounce node simulates diffuse lighting of solid objects accurately with support for multiple bounces. Only diffuse bounces and interactions are handled. This makes it particularly applicable for baking light maps, as the light interactions modelled…

RT Real-Time Denoiser

Nodes » Ray Tracing » RT Real-Time Denoiser

Method Ray tracing is computationally intensive and some effects – such as soft area light shadows – rely on lots and lots of rays being cast per pixel. In order to make this viable in real-time or while editing interactively, Notch typically casts very…

Metallic Material

Nodes » Materials » Metallic Material

Method A basic metallic material, similar to the default material node but default metallic settings. Metallic material BRDF Name Description Specular Colour The colour of specular light reflected from the…

Emissive Material

Nodes » Materials » Emissive Material

Method A basic emissive material, similar to the default material node but without any specular settings. Emissive Material BRDF Name Description Colour The colour of the material. Brightness How…

Diffuse Material

Nodes » Materials » Diffuse Material

Method A basic diffuse material, similar to the default material node but without any specular settings. Diffuse materials BRDF Name Description Colour The colour of the material. Brightness How…

Substance Material

Nodes » Materials » Substance Material

Method Notch allows the use of materials made with Substance Designer from Allegorithmic. The Substance Designer Material once assigned to an object will behave like a standard Notch material. All options are identical, but with the ability to modify the texture on…

Multi Material

Nodes » Materials » Multi Material

Method Generates a material based on an input of two materials. Attributes Name Description Select Image Image used to control how the materials are combined. Select Threshold The threshold used to decide at what area one…

Shadow Catcher Material

Nodes » Materials » Shadow Catcher Material

Method The shadow catcher node captures shadow information from lights cast on to the surface of an object that has the shadow catcher material applied to it. The captured shadow information can then be rendered separately onto surfaces of a scene using the layers…

Alpha Blend (Transparent) Material

Nodes » Materials » Alpha Blend (Transparent) Material

Method This is a basic transparent material using an alpha blend. This material can be applied to particles, 3D meshes and other objects in a 3D scene. Alpha Blend Transparent Material BRDF Name Description Colour …

Global Material List

Nodes » Materials » Global Material List

Method Generates a list of all the materials in the scene from outside sources i.e 3D Objects, Imported 3D Scene, etc. Outputs Output a material that can be used by any node with a material input.

Raytracing Materials

Techniques » Raytracing Techniques » Raytracing Materials

Glass RT Material Glass RT material is a stripped-down version of a default material. Updating BDRF and Alpha/Transparency settings, glass materials can be easily updated to mimic a range of different transparent raytraced materials. Red glass material…

Reflections and Refractions

Techniques » Raytracing Techniques » Reflections and Refractions

Reflections Raytraced reflections are more accurate reflections than Screen Spaced Reflections. The images below show the difference between each raytracing nodes reflections. Sky light The Sky light reflects the skydome HDR environment map, it will not reflect the…

Raytracing Nodes

Techniques » Raytracing Techniques » Raytracing Nodes

Reflections nodes RT Mirror Reflection A single bounce mirror reflection node is the simplest and most efficient raytraced reflection. *This node is great for real-time projects. *There is no surface roughness for this node RT Multi-Bounce Reflection Using the…

Pathtracer Basics

Techniques » Raytracing Techniques » Pathtracer Basics

The Pathtracer node is simply the most accurate and powerful raytracing node. To understand the Pathtracer node it should be thought of as the following raytracing nodes combined in the one node: RT Multi-Bounce Reflections RT Glass Refraction RT Diffuse…

Ray Tracing

Nodes » Ray Tracing

Method Ray tracing is a more accurate “photorealistic” rendering technique for calculating lighting, shadows and reflections in a 3D scene. Raytracing brings to Notch a number of features not previously possible with the traditional renderer and greatly…

Notch 0.9.23 Release Notes

Release Notes » Notch 0.9.23 Release Notes

0.9.23.065 (2nd patch release, 6th November 2019): Added Features Added an EXPLORE button to the Render Still dialog so users can open a Windows Explorer window on the destination image file. Added support for re-syncing audio to the current play position as…

Refining and Denoising

Techniques » Raytracing Techniques » Refining and Denoising

RT Refinement Refining a raytraced scene is a great way to see how your final project will look. Refining a scene should only be used on raytraced scenes that are static frames. Refinement of a scene will not work in real-time due to the time it takes to refine each…

Materials

Nodes » Materials

Method Material nodes control how light interacts with the surfaces of objects. These nodes will accept a material input as a material. 3D Object Shape 3D Shatter Primitive 3D Text Multi Material (Used to create new materials from other…

Sky Light

Nodes » Lighting » Sky Light

Method This node simulates a skylight/dome light by surrounding the scene with a large number of shadow-casting spotlights positioned on the dome pointing inwards. This allows the skylight to be rendered efficiently, although it may still be too slow for real-time use…

Area Light

Nodes » Lighting » Area Light

Method Emit light from a rectangular area, giving a soft light across a scene. An image texture can be input to emit light from the image based on a texture. *This light is great for producing a long flat light source. Example …

Pathtracer

Nodes » Ray Tracing » Pathtracer

Method The Pathtracer node simulates lighting of solid objects accurately with support for multiple bounces of specular and diffuse reflections and refractions with varying roughness and other material attributes. This is achieved by casting lots and lots of rays,…

Using Substance Designer Materials with Procedurals

Nodes » Materials » Substance Material » Using Substance Designer Materials with Procedurals

Using Substance Material with Procedurals Meshes. You can use Substance Designer Materials with Procedurals Meshes. It works the same way as with standard material. Unlike a classic object, you simply need to add a node Mapping:#404 node to assign UVs to the…

Render Still

User Interface » Render Still

Method This window is for rendering a still image from Notch. Presets Label Description Create/Select Preset create or choose preset values for the rendered image. Settings Label Description …

Import and Using a Substance Designer materials

Nodes » Materials » Substance Material » Import and Using a Substance Designer materials

Exporting .sbsar Materials from Substance Designer. To export a material, click on the icon with the arrow. “Publish selected Element(s)” Leave the default settings, click OK. Your substance material is now exported. The extension for substance…

Using Substance Painter exports

Nodes » Materials » Substance Material » Using Substance Painter exports

Method Unlike a material made with Substance Designer, it is not possible to use the Substance Painter file directly. You must export the textures from Substance Painter to use them in Notch. Your Painter project must also be created with the right…

Directional Light

Nodes » Lighting » Directional Light

Method Add a directional light node to a scene to produce ambient directional lighting throughout. Light is emitted in a parallel direction at the normal to an infinite plane. *Directional lights do not cast shadows. Example Nodegraph…

Shading Nodes

Nodes » Shading Nodes

Method These nodes change the ways that material nodes apply to an objects, and how their materials are shaded on the object surface. Gallery Noise Fractal Shading Grid Shading Node Gradient Shading Node…

Exporting Video

User Interface » Exporting Video

Method This is the dialogue window for exporting a video from Notch. !If you’re exporting a slow scene with heavy render settings, we strongly recommend you turn off your computers sleep wake settings, as this can interrupt the rendering process…

Lines

Nodes » Geometry » Lines

Method This node draws lines between the positions of its input nodes, from source points to destination points. Transform Name Description Position X Move its position along the x-axis in local space. Position Y Move its…

Voronoi Post Process

Nodes » Post-FX » Stylisation » Voronoi Post Process

Method This node generates a voronoi triangulation effect on a pixel by pixel basis. Raw texture Processed texture Example Nodegraph Attributes Name Description Active Turn the…

GBuffer To Image

Nodes » Video Processing » Input Output » GBuffer To Image

Method This node allows GBuffer channels from a rendered scene to be used as video nodes for compositing or export purposes. By default the base render layer is used as the GBuffer source, but a Render Layer may be supplied via appropriate input. For most channels…

Node Trail

Nodes » Geometry » Node Trail

Method This node creates a spline that follows the position of a node in the scene. At each frame update, a new point is added to the spline. Transform Name Description Position X Move its position along the x-axis in local space.…

Output GBuffer

Nodes » Post-FX » Image Processing » Output GBuffer

Method This node outputs various GBuffers to the screen. GBuffers are geometry buffers – rendered images that contain geometric information rendered from the objects in the current view, such as normals, material IDs, positions etc. These may be useful when…

Text

Nodes » Geometry » Text

Method This node generates and renders a 3D mesh from the text that has been generated according to various attributes using a supplied font. The font must be in TrueType or OpenType format and loaded as a Font resource. Text must be entered via the Text String…

Screen Space Reflections

Nodes » Lighting » Screen Space Reflections

Method Generate screen space reflections (SSR) for objects in the scene. To see this function, “Reflections” must be enabled in the objects material node or section. ! The material nodes Roughness attribute defines the clarity of the reflections, with…

Particle Cache

Nodes » Particles » Particle Cache

Method The particle cache node allows you to store the animation of particles to disk. This allows them to be scrubbed in time and played deterministically rather than simulated during playback. Particle cache files may be very large on disk. Example Nodegraph…

Convex Hull

Nodes » Geometry » Convex Hull

Method Generates a containing mesh based on an input object. The mode can control how accurate the generated outer mesh is. Attributes Name Description Mode Determines how convex hull mode generates the wrapped hull around the input…

Clone To Transform Array

Nodes » Cloning » Clone To Transform Array

Method This node generates clones from the currently active elements in a Transform Array node. Transform Name Description Position X Move its position along the x-axis in local space. Position Y Move its position along…

Face Tracking Geometry

Nodes » Geometry » Face Tracking Geometry

Method This node generates a 2D mesh using the predefined structure of the geometry generated by the Face Tracker node: 68 vertices linked as triangles with texture coordinates. It takes as input a Face Tracker node, which is required for the node to render anything.…

Mapping

Nodes » Nodes » Mapping

Method This node controls how texture coordinates (UVs) are generated for a given material or piece of 3D geometry. This allows UVs to be created procedurally, e.g. via planar, spherical or camera perspective mappings. The Mapping node acts on a Material…

Emitters

Nodes » Particles » Emitters

Method Emitter nodes spawn particles that can be manipulated in a particles system. Any Emitters need to be connected to a Particle Root node, and they will only spawn particles within that particle system unless modified appropriately. Every emitter has a…

Level Set (Field)

Nodes » Procedural » Generators » Level Set (Field)

Method This node allows a Field Level Set System to be used as a procedural generator source. This path is useful for generating fluid like meshes via the Procedural Meshing Node. Example Example Nodegraph …

Clone To Spline

Nodes » Cloning » Clone To Spline

Method This node is used to clone objects along the spline created by an input Spline node or other source of spline data – for example from a loaded Cinema4D scene. Example Example Nodegraph …

Clone To Procedurals

Nodes » Cloning » Clone To Procedurals

Method This node generates a clone system based on the procedural generator nodes. A clone is generated at every voxel inside the field. Example Transform Name Description Position X Changes the x…

Procedural Meshing

Nodes » Procedural » Render Nodes » Procedural Meshing

Method Extracts a surface from a procedural by first voxelising it (but only voxelising the spatial areas which are required) and then constructing a smoothened surface over the voxels. The surface produced is a triangle mesh which can be texture and deformed, can…

Particles As Primitives

Nodes » Procedural » Generators » Particles As Primitives

Method Generates primitives based on the positions and movement of particles from a particle system. Example Example Nodegraph Attributes Name Description Particle Size Edit the size of…

Cellular Noise

Nodes » Procedural » Generators » Cellular Noise

Method This node generates a cellular noise pattern which is potentially infinite. It works by dividing the space in to cells and placing a point in each cell, which is expanded to a sphere. The placing of the points is randomised. Example …

Light Scattering Beam

Nodes » Post-FX » Generators » Light Scattering Beam

Method This node generates a light beam, visually similar to what is achieved when Scattering Intensity is used on a Light node, but without needing to add a light to the scene or enable Deferred Rendering. *This does not emit light, will not affect surfaces adjacent…

Clone To Image

Nodes » Cloning » Clone To Image

Method This node is used to clone 3D objects to pixels in an image or video, using the pixel colours to scale, offset or colour the clones. 3D objects are cloned to positions in a regular 2D grid in the XY plane, with the number of cells defined by the Num Clones X…

Clone To Point Cache

Nodes » Cloning » Clone To Point Cache

Method This node clones 3D objects to positions defined by a Point Cache node. The number of clones is defined by the Num Clones parameter and limited by the total number of points in the Point Cache (accounting for the density attribute set in the Point Cache). If…

Geometry Connection Renderer

Nodes » Particles » Rendering » Geometry Connection Renderer

Method This node generates faces and lines based on the position of particles in the scene. Particles are joined with lines by proximity, and where lines form a triangle one is created. Example From the “No Thanks” sample.…

3D Object Outline

Nodes » Post-FX » Stylisation » 3D Object Outline

Method This node draws an outline around the visible edges of the 3D objects. *This node uses the scene depth buffer to render, so when used with a Render Layer all objects inside and out will be outlined. This can be avoided by using the Affected Objects input on…

Shape 3D

Nodes » Geometry » Shape 3D

Method This node renders a 3D primitive mesh that has been generated according to various attributes. The Shape Type parameter defines the primitive shape used. The Subdivisions X/Y parameters determine how many subdivisions the primitive has, and the Axis defines…

Clone To Particles

Nodes » Cloning » Clone To Particles

Method This node clones 3D objects to positions defined by a particle system. A Particle Root Node or a Particle Emitter must be connected to the Particle Node input for this node to be operational. If a Particle Emitter is connected then only particles emitted from…

Combine Geometry

Nodes » Geometry » Combine Geometry

Method Combine multiple sources of geometry into one to be used or affected by other nodes. Rendering Name Description Visible Control whether the node is visible or not to the scene. Lines Name Description …

Clone To Volume

Nodes » Cloning » Clone To Volume

Method This node clones 3D objects in a regular 3D grid arrangement, using the shape of a 3D object to define the region of space that is filled. The resolution of the grid is defined by the Num Voxels X/Y/Z parameters. A 3D object node must be connected to the Source…

Particle Event

Nodes » Particles » Particle Event

Method Particle Events are used to affect change in a particle system when something happens to an individual particle: for example, when a collision occurs between the particle and a collision surface, new particles may be emitted at that point; or when a particle…

Image

Nodes » Procedural » Generators » Image

Method Create a 3D shape by using the luminance of an input image as a mask. Example Example Nodegraph Transform Name Description Position X Move its position along the x-axis in local…

Procedural Emitter

Nodes » Particles » Emitters » Procedural Emitter

Method This node is used to emit particles from a generative form created using Procedural nodes. Example Example Nodegraph Transform Name Description Position X Move its position…

Extruded Spline

Nodes » Geometry » Extruded Spline

Method This node extrudes n-gon shapes along a spline. The spline used to generate the shape must be connected via the Spline Sources input. Attributes Name Description Visible Control whether the node is visible or not to the scene.…

Random Cloner

Nodes » Cloning » Random Cloner

Method Clones an object and gives the new clones random positions within a specified area. Example Example Nodegraph Transform Name Description Position X Move its position along the…

3D Object

Nodes » Procedural » Generators » 3D Object

Method Generates a procedural shape from a mesh object. Example Example Nodegraph Attributes Name Description Distance Offset Offsets the distance field values, causing the generated…

Clone

Nodes » Procedural » Cloning » Clone

Method Makes copies of its children. Example Example Nodegraph Example Project Transform Name Description Position X Move its position along the x-axis in local space. …

Gradient Shading Node

Nodes » Shading Nodes » Gradient Shading Node

Method This node applies a gradient to the shading of a material node. This can be used to deform, recolour and change the lighting on a mesh. Example A Mapping type Object coordinate – B Mapping type Object Output channel…

Cloner

Nodes » Cloning » Cloner

Method This node clones 3D objects in a regular pattern in one of several ways depending on the Mode parameter. In Iterative Cloning mode, the Cloner node’s transform is applied iteratively so each clone is offset from the one before it. In Radial mode, clones…

Particles

Nodes » Procedural » Generators » Particles

Method Generates a shape based on the positions and movement of particles from a particle system. Example Example Nodegraph Attributes Name Description Particle Size Size of the…

Viewport

User Interface » Viewport

Window This window show the actual scene, and what will be rendered / output by Notch into other tools. Top Bar Label Description Translation Switch to the translate gizmo. Rotation Switch to the rotate…

Procedural

Nodes » Procedural

Method In Notch a procedural is a 3-dimensional field of signed distances. This is often known as a Signed Distance Field. An SDF alone does not represent geometry, but surfaces and volumes can be extracted from the field and rendered conventionally. Notch provides…

3D Object

Nodes » Geometry » 3D Object

Method This node renders a 3D object that has been imported from an external file in one of the supported 3D object file formats: Lightwave LWO, Wavefront OBJ, Cinema4D and FBX. As well as being rendered directly, 3D Object nodes may also be used as an input for…

Field Emitter

Nodes » Particles » Emitters » Field Emitter

Method This node emits particles from a Field. It can also use Colours, Density, or Temperatures from Density Field Modes. Example Example Nodegraph Transform Name Description Position X…

3D Primitive

Nodes » Procedural » Generators » 3D Primitive

Method This node renders a 3D primitive only usable with procedural node. The Primitive Type parameter defines the primitive shape used. Procedural Primitives Procedural Primitives Nodegraph Transform Name…

Fractal Noise

Nodes » Procedural » Generators » Fractal Noise

Method Generates simple 3D fractal noise. Example Example with CSG sphere Example Nodegraph Transform Name Description Position X Move its position along the…

Meshing Texture Map

Nodes » Procedural » Texturing » Meshing Texture Map

Method Applies a colour texture map to a procedural. This only has an effect if the procedural renderer supports colour generation. The map has a built-in falloff allowing multiple texture maps to be blended together. Example Example…

Render To Object Surface

Nodes » Fields » Rendering » Render To Object Surface

Method The field is sampled spatially on to the surfaces of visible 3D objects. The Render to Object Surface node should be parented to the Field Root node. Deferred Rendering must be enabled in the Layer Root node for this to work. Example …

Spline Emitter

Nodes » Particles » Emitters » Spline Emitter

Method This node emits particles from a spline shape. The splines used by this node are extracted from a 3D object which must be connected to the Object Nodes input for this node to have an effect. If The object that is connected contains no spline data this node will…

Point Cache Emitter

Nodes » Particles » Emitters » Point Cache Emitter

Method Emits particles from the points in a Point Cache. This is useful for saving on mesh processing cost by re-using a single point cache for multiple emitters as well as other features such as lighting and cloning. Example …

Reaction-Diffusion

Nodes » Procedural » Generators » Reaction-Diffusion

Method Performs reaction-diffusion simulation, using a procedural input to restict the placement of seeds and another procedural input to restrict growth. This node simulates the Gray-Scott reaction-diffusion process, which can be thought of as a kind of fluid…

Mirror

Nodes » Procedural » Cloning » Mirror

Method Effectively folds its children on to themselves over a specific plane of reflection. Example Example Nodegraph Example Project Transform Name Description Position X Move its…

Editable Code

Nodes » Procedural » Generators » Editable Code

Method Allows a custom piece of HLSL code to be written to produce a distance value from which a procedural shape will be created. For best results with this node you should have a working knowledge of the HLSL shading language, and signed distance…

Depth Camera / Kinect Mesh

Nodes » Geometry » Depth Camera / Kinect Mesh

Method This node generates a mesh based on Kinect camera data from a Depth Camera / Kinect Source connected via the “Colour Image Node” input. If no source is connected, this node is ineffective. The mesh is based on a subdivided plane of quads, displaced…

Trail Emitter

Nodes » Particles » Emitters » Trail Emitter

Method This node emits particles from the positions of other currently active particles from other emitters. This is used to create trails of particles. This node is typically connected as a child of another emitter node. When connected in this way it only emits…

Clone To Mesh

Nodes » Cloning » Clone To Mesh

Method This node clones 3D objects to positions defined by the vertices or polygon centres of another 3D object. A 3D object node must be connected to the Source Objects input to define the voxelised shape the clones are arranged in for this node to be operational.…

Root

Nodes » Nodes » Root

Method The Root node for the scene, controlling the basic menu and other important scene attributes. Attributes Name Description Background Colour Change the background colour. Backdrop Glow Defines the “glow”…

Melt

Nodes » Procedural » Displacement » Melt

Method Smoothens the shape a procedural in 3D space, much like how a blur smoothens an image in 2D space. Example Example Nodegraph Transform Name Description Position X Move its…

Primitive Collision Affector

Nodes » Particles » Affectors » Primitive Collision Affector

Method This node simulates collisions between particles and a 3D primitive. It uses ray traced intersections with triangles contained in a bounding volume hierarchy structure. This allows for fast, accurate collisions with 3D primitive, but animating. Particle Events…

Optimising 3D Scenes for Notch

FAQ » Optimising 3D Scenes for Notch

Working in real-time allows for great speed, flexibility and experimentation vs offline rendering / video. But projects designed to run in real-time have one key consideration that video doesn’t: performance. Performance of most real-time 3D scenes is limited…

Light

Nodes » Lighting » Light

Method Add a Light node into the scene. *Attach the Target Node input to any object, to have the light track that object. *The default light node is a spotlight, in the node properties use the Light Type drop-down menu to toggle between Spot, Omni, Directional, Area…

Other Windows

User Interface » Other Windows

Performance Bar And Window Controls Window Controls This menu controls some of the window options for various windows in Notch. Label Description Editor Settings Settings for the Notch Editor. Project Settings…

Noise Shading Node

Nodes » Shading Nodes » Noise Shading Node

Method This node applies simple noise to the shading of a material node. This can be used to deform, recolour and change the lighting on a mesh. Example Example Nodegraph Transform Name Description…

Grid Shading Node

Nodes » Shading Nodes » Grid Shading Node

Method This node applies grid pattern to the shading of a material node. This can be used to deform, recolour and change the lighting on a mesh. Example A 2d grid with alpha blended – B 3Dgrid – C 2D grid – …

Voronoi 2D

Nodes » Post-FX » Generators » Voronoi 2D

Method Generate delaunay triangulation based on a particle system. This process is computationally expensive. Example Nodegraph !Does not function with Ray Tracing nodes. Transform Name Description …

Environment Map

Nodes » Lighting » Environment Map

Method Add an environment map node to a scene, add an image to the nodegraph and plug it into the environment map node. You should Ideally use .exr of .hdr images – HDRI Haven is a great resource for these images. The environment map output can be plugged into…

Nodegraph

User Interface » Nodegraph

Main Window This window contains the node based scripting tools for Notch. Nodegraph Controls Label Description Copy Copy the currently select node or nodes. Cut Copy and delete the currently selected node…

Primitive Emitter

Nodes » Particles » Emitters » Primitive Emitter

Method This node emits particles in the form of a 3D primitive shape. The Emitter Type parameter defines which shape is used. Particles can be emitted on the surface of the shape or inside the volume of the shape, depending on the Emit On Surface parameter. If the…

Video Feature Emitter

Nodes » Particles » Emitters » Video Feature Emitter

Method This node emits particles from an image or video by extracting feature points from the image or video frame. The image or video may be set directly using the Image attribute, or taken from a node connected via the Video Node attribute. Features are extracted by…

Screen Emitter

Nodes » Particles » Emitters » Screen Emitter

Method This Emitter emits particles only from objects within the cameras view. Particles can be emitted from other layers by adding a Render Layer node as an input to this node. Example Transform Name Description …

Mesh Emitter

Nodes » Particles » Emitters » Mesh Emitter

Method This node emits particles from a 3D mesh. The mesh must be connected via the “Object Nodes” input, and can be a 3D Object node, a Shape 3D node, a Text node or a Depth Camera / Kinect Mesh. If no suitable node is connected then no emission will…

Trail Renderer

Nodes » Particles » Rendering » Trail Renderer

Method This node generates trails of lines or points along the path of individual particles to create trail-like effects. This is done by sampling the particle position at regular time intervals and storing the samples as control points in a path buffer. The size of…

Object Distance Field Affector

Nodes » Particles » Affectors » Object Distance Field Affector

Method This node simulates collisions between particles and a 3D object. It uses signed distance fields to calculate collisions which enables some other effects to be achieved, such as attraction and repulsion from object surfaces or making particles flow around the…

Texture Shading Node

Nodes » Shading Nodes » Texture Shading Node

Method This node applies a chosen texture to the shading of a material node. This can be used to deform, recolour and change the lighting on a mesh. Example A Output channel normal – B Output channel TGBA with alpha blended…

Nodes

Nodes

This is the Notch node reference. Notch node types: Cameras: Cameras define the point of view, perspective and aspect from which the scene is rendered. Cloning: Cloners instantiate multiple copies of geometry nodes – such as 3D Objects, Text Nodes and Shape…

Imported 3D Scene

Nodes » Geometry » Imported 3D Scene

Method This node instanciates a 3D scene which has been imported from one of the valid scene file formats: Lightwave LWS, FBX or Cinema4D. The scene resource must be set via the “Lightwave Scene” parameter. The scene is then rendered faithfully to the…

Fractal Noise Shading Node

Nodes » Shading Nodes » Fractal Noise Shading Node

Method This node applies fractal noise to the shading of a material node. This can be used to deform, recolour and change the lighting on a mesh. Fractal Type A FBM fractal – B Turbulence – C Ridged Multi Fractal …

Image Emitter

Nodes » Particles » Emitters » Image Emitter

Method This node emits particles from an image or video. It can make use of motion vectors to make particles track the motion of a video once emitted. The image or video may be set directly using the Image attribute, or taken from a node connected via the Video Node…

Image Plane

Nodes » Geometry » Image Plane

Method This node is used to render an image or video on a plane in 3D space. The image may be set directly via the Image parameter or linked via the Video Node input. Image Plane nodes have similar rendering options to other geometry nodes such as 3D Objects or…

Render Particles To Surfaces

Nodes » Particles » Rendering » Render Particles To Surfaces

Method This node renders particles onto nearby 3D surfaces. This means that instead of rendering particles directly into space, they instead appear as splats on 3D geometry, only being visible when they are close enough to 3D geometry. This is particularly useful when…

Keyboard Shortcuts

Keyboard Shortcuts

Viewport Keys Orbit Camera Regular Camera Alt + LMB Rotate around pivot point Rotate around camera axis. Alt + MMB Pan Pan Alt + RMB or Alt + Scroll or Ctrl + Alt + LMB Dolly in and out …

Point Renderer

Nodes » Particles » Rendering » Point Renderer

Method This node renders a point sprite for every particle. A point sprite is a quad which is positioned in 3D space, is rotated to face the camera and may be textured. This is the most commonly used rendering node for particle effects. Particles can be sorted in…