This node reads CC values from channels of a MIDI device so they can be used to control values on other nodes.
The MIDI channel can be selected manually, or use “Listen For Channel/CC” and make a change on the device and the channel will be picked up automatically.
|Current Value||Shows the current value of the effect. Cannot be directly changed.|
|Channel||Choose which MIDI channel to use for the modifier.|
|CC||Select which control change to modify the channel.|
|Use Recorded Value||Uses the recorded MIDI files, instead of the live input from a MIDI device.|
|Listen For Channel/CC||Listen for the incoming MIDI device.|
|Recording..||Start recording changes in the current value, to save to as a sequence of keys on a newly created attribute.|
|Scale||The scale/range of the modifier|
|Offset||Offset the current value of the incoming|
|Operation|| The operation to be performed on the targeted parameter.
|Recorded Value||The currently recorded value being used.|
|Recorded Value #||A keyed series of inputs matching the input from the the midi controller that can be reused.|
There are no inputs for this node.
The output is a numeric value that acts upon a connected parameter input of another node, using the operation method selected.